Service hotline: +86 0755 2305 0802

SEARCH WHAT YOU WANT

Lithuania 50kW100kWh outdoor cabinet ESS project

微信图片_20250214165808-改-ins.jpg

100kW-215kWh光储充系统.jpg

Monet Series 100kW/215kWh PV Storage And Charging System(On Grid)

It integrates PCS, BMS, EMS, photovoltaic modules, charging modules, and other parts. lts working principle is based on the "PV + energy storage + charging" solution. lt can be applied in various scenarios such as EV charging stations, industrial par...

1
NaN

Prev：Bulgaria 100kW215kWh Energy Storage System project

Next：Finland 100kW215kWh modular ESS project

Contact Us

Ready to start a project?

Let's talk about it

E-Mail: info@en.elecod.com

Tel: +86 0755 2305 0802

C&I Modular Energy Storage Converter

Modular PV Storage Hybrid Inverter

C&I Modular Energy Storage System

125130kW背书包解决方案拓扑图.png

IP65 PCS "Backpack" Solution(NEW)-

IP65 PCS "Backpack" Solution(NEW)

The solution adopts Elecod 125kW ESS power module and supports 15 sets in parallel in on-grid mode and 4 sets in parallel in off-grid mode. IP65 protection level, undaunted by high altitude or high salt fog. Compatible with battery cabinets of mainstream battery manufacturers in the market, battery manufacturers do not need additional design, and system integration can be achieved with a simple plug-in. The PCS outside design not only saves space inside the cabinet but also allows maintenance personnel to easily inspect, repair, and replace energy storage modules without disassembling or moving the entire cabinet. At the same time, this solution optimizes power distribution, heat dissipation, and other parts, with a simpler structure and a higher cost-effectiveness for the entire cabinet.

ESS Peak Shaving Solution(On Grid)削峰填谷.jpg

ESS Peak Shaving Solution(On Grid)-

ESS Peak Shaving Solution(On Grid)

The solution is specially designed to reduce industrial and commercial electricity costs, improve power supply reliability and improve power quality. By deploying energy storage and implementing integrated energy management, industrial and commercial users with fluctuating power loads can effectively reduce their electricity expenses. During power outages in the main power grid, the ESS can provide continuous power supply to local loads to ensure uninterrupted production and operation for C&I users. This solution uses 5 sets of 100kW/215kWh modular outdoor cabinet energy storage system, which support up to 15 units in parallel. It's an ideal choice for application scenarios such as factories, residential areas, shopping centers, hospitals, and hotels.

PV+ESS PV Consumption Solution(On Grid)光伏消纳.jpg

PV+ESS PV Consumption Solution(On Grid)-

PV+ESS PV Consumption Solution(On Grid)

The solution is specially designed to solve the problem of photovoltaic consumption. By stores photovoltaic power in batteries directly and discharges it to the load at night, It has pretty of advantages in solving the consumption problem, including smoothing the load for users and reducing electricity costs. This solution uses 5 sets of modular outdoor cabinet energy storage system, which supports up to 15 units in parallel. It's an ideal choice for peak-shaving and valley-filling in zero-carbon parks and villa communities.

PVGenerator+ESS Backup Power Supply Solution(MicrogridOff Grid)光储柴后备供电.jpg

PV/Generator+ESS Backup Power Supply Solution(Microgrid/Off Grid)-

PV/Generator+ESS Backup Power Supply Solution(Microgrid/Off Grid)

This solution is specially designed for remote areas such as islands, mountainous areas, and border posts where power supply is unstable. It's responsible for providing power balance and control for microgrids in various energy systems such as photovoltaics, wind power, diesel engines, and public power grids. Photovoltaic/diesel generators are charged during the day and run off-grid at night. This solution uses 4 sets of 50kW/100kWh modular ESS, which support up to 4 units in parallel. It's an ideal choice for application scenarios such as farms, construction tower cranes, and oil fields.

PV+ESS+EV Charging Solution(On Grid)光储充.jpg

PV+ESS+EV Charging Solution(On Grid)-

PV+ESS+EV Charging Solution(On Grid)

This solution is designed to meet the development needs of renewable energy and new energy vehicles, that is, photovoltaic + energy storage + EV charging mode, using photovoltaic power generation to provide green and clean electricity for power stations and car owners. When the photovoltaic generation power is higher than the power used by the charging pile, the left power is stored in the energy storage battery. During the peak power consumption period, the energy storage battery power is used first to reduce the impact of the charging peak and lower the operating costs of charging stations in different scenarios. At the same time, when the power supply is limited, it can be used as a power supplement for the fast charging system. It's the best choice for application scenarios such as urban charging stations, highway service areas, and industrial parks.

Container ESS+PVEV Charging Solution集装箱储能解决方案.jpg

Container ESS+PV/EV Charging Solution-

Container ESS+PV/EV Charging Solution

This solution can work in coordination with wind and solar resources, which can not only significantly improve the absorption rate of clean energy and smooth out fluctuations in electricity supply and demand, but can also be combined with advanced technologies such as smart energy management platforms and the IoT, helping to promote the transformation of the energy structure and provide important support for achieving carbon peak and carbon neutrality goals.

Company Introduction

Subscribe to newsletter

Terms and Conditions

Copyright © 2025 Shenzhen Elecod Electric Co., Ltd.